Up to 22kW · Installed on the Sunshine Coast
EVNEX
E2 and X series, designed in New Zealand. Supplied, installed and commissioned by the Sunshine Coast's home EV charging specialists.
Max power
Up to 22kW
Origin
New Zealand
Service area
the Sunshine Coast and surrounding hinterland
- Licensed QLD Electrical Contractor
- AS/NZS 3000 Compliant
- Certificate of Testing
- Fixed Price Quotes
- Sunshine Coast Based
- Clean, Tidy Installations
Overview
About the EVNEX
EVNEX is designed and supported in Australasia, with the E2 and X series covering home and small commercial sites, built on open OCPP software.
Key features
- Designed and supported in Australasia
- OCPP 1.6J with open back-end options
- Load management and solar modes
Power options
- Single and three phase models available
- Tethered cable options across the range
- Load management and solar modes on supported models
Charging speed
Single phase up to 7.4kW (about 32km of range per hour) or three phase up to 22kW, with the real rate capped by your vehicle's onboard charger — commonly 7kW to 11kW.
Smart app features
- OCPP 1.6J for open, non-locked software
- Solar and off-peak scheduling modes
- Load management via CT clamp
- Fleet and multi-site management for commercial accounts
App and control
The EVNEX app handles scheduling, current limits and session history, with OCPP 1.6J available for third-party back-office platforms.
Solar compatibility
Solar-aware charging modes are supported with a CT clamp, working with any inverter brand.
Warranty
EVNEX's Australasian warranty and support terms apply, with local technical support if something needs attention.
Who it suits
Buyers who want a charger backed by a local support team and software that isn't locked to one vendor's app.
Pros
- Designed and supported within the region, not overseas-only
- Open OCPP 1.6J software
- Solar and load management supported
- Suits both single homes and small multi-bay sites
Things to consider
- Less widely known in Australia than Tesla or Wallbox
- Full feature set depends on which model in the range is specified
Installation requirements
- Dedicated circuit sized to current
- Switchboard capacity or upgrade path
- Residual current protection as specified
- Agreed mounting surface and cable route
- Certified installation to AS/NZS 3000
Why we recommend it
For buyers who want the reassurance of regional support and a genuinely open platform, EVNEX is a strong, less locked-in alternative.
Best for: Buyers who want local support and open, non-locked software.
Installation
How it goes in
Every charger we supply is installed on a dedicated, protected circuit and certified on completion.
FAQs
EVNEX questions
Where is EVNEX based?
EVNEX is designed in New Zealand, with support and distribution covering the Australasian market.
Is EVNEX locked to its own app?
No, OCPP 1.6J means it can connect to third-party management platforms if you need one later.
Can it manage several chargers on one site?
Yes, the platform supports multi-site and multi-charger management for strata or small fleets.
Does it support solar diversion?
Yes, with a CT clamp accessory, working with any inverter brand.
What warranty applies?
EVNEX's published Australasian warranty term, which we register on your behalf at handover.
Is it suitable for a home with two EVs?
Yes, with load management configured so both cars share the available circuit safely.
Installed on the Sunshine Coast
EVNEX, supplied and installed.
Fixed-price quote, certified installation and a walkthrough of the app before we leave.
Supplied, installed and certified.
Fixed price, same-day quotes across the Sunshine Coast.
- Fixed-price quotes
- Licensed Queensland electricians
- Installed to AS/NZS 3000
- Same-day quote turnaround